STEINIG-Oil skimmer OTF-BE (Belt skimmer)

belt width 40–200 mm
oil recovery at total covered oil layer approx. 4–15 l/h
oil outlet with tread and hose nozzley
temperature up to 90 °C according belt
pH-value 3–13
submersible depth ET up to 2000 mm
input supply voltage 110 V or 230 V, 50 Hz, operating voltage 48 V

Version OTF-BEE…(1) is a very cheap design and without a total casing, input supply voltage 110 V or 230 V, 50 Hz, operating voltage 24 V belt width 40–100 mm

OTF-BE...(2) Belt Skimmer

Oil skimmer special for coolant emulsions designed, however for other applications to use too.

belt width 60–100 mm
oil recovery at total covered oil layer approx. 3–20 l/h
oil outlet with tread R 3/4“ Ior hose nozzle 20 mm outside Ø
temperature up to 70 °C according belt
pH-value 4–13
submersible depth ET up to 2500 mm
input supply voltage 110 V or 230 V, 50 Hz
motor protection IP 40

Micro aerater

For oxygenation into coolant emulsions, thereby and in connection with an oil skimmer there will be the life of the expensive coolant emulsions much more longer.

optimal full automatic maintenance from singe machines
radical cutback from problem of smell and bacterium attacks at single machines
vessel or tank size up to 1000 l
submersible depth ET up to 1000 mm
temperature up to 55 °C

OTF-BET…(3) Belt skimmer

Oil skimmer special for coolant emulsions designed, however for other applications to use too.

portable design, included tension safety type C and handle grip
belt width 40 mm
oil recovery at total covered oil layer approx. 4 l/h
oil outlet with hose nozzle 20 mm outside Ø
temperature up to 60 °C according belt
pH-value 6–9 (special design with other materials possible)
submersible depth ET 345 and 645 mm
input supply voltage 110 V or 230, V 50 Hz, operating voltage 6–12 V
switchable and therefore adjustable speed

OTF-BE…(5) Belt skimmer

Oil skimmer special for coolant emulsions designed, however for other applications to use too.

belt width 25–80 mm
oil recovery at total covered oil layer approx. 4–20 l/h
temperature up to 60 °C according belt
pH-value 6–9
submersible depth ET up to 2500 mm
input supply voltage 110 V or 230 V, 50 Hz, operating voltage 6–12 V switchable and therefore adjustable speed
motor protection IP 40

OTF-BET…(6) Belt skimmer

Oil skimmer special for coolant emulsions designed, however for other applications to use too.

very robust design, without handle grip
portable design, included tension safety type D (at both sides at belt 80 mm width)
portable design, included tension safety type C (at one side at belt 25 mm width)
belt width 25 and 80 mm
oil recovery at total covered oil layer approx. up to 15 l/h
temperature up to 60 °C with belt, with chain up to 100 °C
pH-value 6–9
submersible depth ET 400, 800 or 1200 mm (other on request)
input supply voltage 110 V or 230 V, 50 Hz, operating voltage 3–12 V switchable and therefore adjustable speed
motor protection IP 54
with chain or belt width 25 mm total made of stainless steel on request

OTF-BET…(7) Belt skimmer

Oil skimmer special for coolant emulsions designed, however for other applications to use too.

portable design, included tension safety type C without handle grip
belt width 50 mm
oil recovery at total covered oil layer approx. 5 l/h
temperature up to 110 °C according belt
pH-value 6–9
submersible depth ET 280, 500 or 800 mm
input supply voltage 110 V or 230, V 50 Hz, operating voltage 3–12 V
switchable and therefore adjustable speed

OTF-BE…(8) Belt skimmer

Oil skimmer special for coolant emulsions designed, however for other applications to use too.

belt width 30–100 mm
oil recovery at total covered oil layer approx. 3,2–20 l/h
temperature up to 95 °C according belt and design type
pH-value 2–14

submersible depth ET	size 30/33	up to 400 mm
	size 60/39, 80/35	up to 1200 mm
	size 60/28	up to 6600 mm
	size 100/56	up to 1600 mm

input supply voltage 110 V or 230 V, 50 Hz, 24 V
motor with one venting slot
unit total made of stainless steel spark-polished, driving roll of PVC or PP, tension of steel passivated or stainless steel with tension safety type C (at one side) on request

OTF-BEM...(8) Belt Skimmer

Oil skimmer special for coolant emulsion designed how ever applicate for other applications to use.

belt width 30 and 60 mm
Oil recovery at good covered oil layer up to 3 l/h with belt 30 mm width and 6 l/h with belt 60 mm width
submersible depth ET 100 - 500 mm
temperature up to 40 °C
pH-value 5 - 10
connetction electrical power 110 or 230 V, 50 Hz, running power 24 V
motor included one venting slot
total made of stainless steel electrical polished, driving roll PVC or PP, tension roll steel passiveted or stainless steel
mountage with magnetic foot

OTF-BET…(8) Belt skimmer

Oil skimmer special for coolant emulsions designed, however for other applications to use too.

portable design, included tension safety type C and handle grip
belt width 30–60 mm
oil recovery at total covered oil layer approx. 3–5 l/h
temperature up to 60 °C according belt and design type
pH-value 2–14
submersible depth ET
- size 30/41 up to 400 mm
- size 60/42 up to 1200 mm
motor drive with NiMH-Accu, rechargeable
hours of operation approx. 3,5 hours
motor with one venting slot
unit total made of stainless steel spark-polished, driving roll of PVC or PP,
tension of steel passivated or stainless steel
with tension safety type C (at one side) on request

OTF-BET…(9) Belt skimmer

Oil skimmer special for coolant emulsions designed, however for other applications to use too.

portable design but with reconnect device
belt width 120 mm
oil recovery at total covered oil layer approx. 45 l/h
temperature up to 85 °C according belt
pH-value 6–9
submersible depth ET up to 5500 mm
input supply voltage 110 V or 230 V, 50 Hz, operating voltage 24 V, adjustable speed by turning knob potentiometer
with reconnect device

OTF-BE…(10) Belt skimmer

Oil skimmer special for coolant emulsions designed, however for other applications to use too.

belt width 120 mm
oil recovery at total covered oil layer approx. 40 l/h
temperature up to 80 °C according belt
pH-value 6–9
submersible depth ET up to 5000 mm
input supply voltage 110 V or 230 V, 50 Hz, operating voltage 24 V, adjustable speed by turning knob potentiometer
for constant mounting

OTF-BE…(11) Belt skimmer

Oil skimmer special for coolant emulsions designed, however for other applications to use too.

belt width 80 mm
oil recovery at total covered oil layer approx. 4 l/h
temperature up to 70 °C according belt
submersible depth ET up to 2000 mm
input supply voltage 230 V, 50 Hz, adjustable speed 0,5–10 min-1, motor itself total capsuled
complete of PP plastic
for constant mounting

otf-be-12
with broader drain,
assembly tube for clamping
or strong magnet foot

otf-be-12
with hose/tube nozzle,
assembly tube for clamping
or strong magnet foot

OTF-BE...(12) Belt Skimmer

Oil skimmer special for coolant emulsions, axle/spindle oil, hydraulic oil, oil with a lot of foam (foam must be runable), plastic chips and many other application possibilities developed, however, also for other areas of application usable.

belt width 29, 49 or 80 mm
oil recovery at good covered oil lawer about 3 – 8 l/h
oil outle nozzle for hose connection 20 mm out side Ø
or over a width drain
oil outlet possible with special drain for oil with high foam part, plastic chips or similar
casing made of alloy
templerature up to 96 °C possible but without steam around this unit
pH-value 4 – 10
submersible depth ET in different length
connected and running voltage 230 V or 110 V, 50 Hz
protection kind IP 40
assembly/mountage over delivered magnetic foot or over the clamping tube included concurrent verttical adjustment

otf-ber-12
with rest water separator
and magnetic foot

OTF-BER...(12) Belt Skimmer

R = with Rest water separater, the small rest water contained in the oil will be separated inside the oil skimmer will be back flow in the emulision tank. The nearly water-free oil flows into the oil collecting tank.
Oil skimmer speciell for coolant emulsions, spindle/axle oil, hydraulic oil, and many further applications, however suitable for much other applications too.

belt width 29 or 49 mm
oil racovery at good covered oil lawer about 3 - 5 l/h
oil outlet and rest water outlet with hose nozzle 20 mm outside Ø
casing of alloy
temperasture up to 96 °C possible but without steam around this unit
pH-value 4 – 10
submersible depth ET in different length
connected and running voltage 230 V or 110 V, 50 Hz
protection kind IP 40
assembly/mountage over delivered magnetic foot or over the clamping tube included concurrent verttical adjustment