STEINIG-Oil skimmer OTF-SL (with hose/tube)

OTF-SL…(1) Hose skimmer / Tube skimmer

Oil skimmer special for coolant emulsions designed, however for other applications to use too.

special design
free of non-ferrous heavy metal total made of steel or stainless steel

Oil skimmer special for coolant emulsions designed, however for other applications to use too.

Oil skimmer special for coolant emulsions designed, however for other applications to use too.

horizontal design
hose / tube Ø 5 und 10 mm
hose length maximum 25 m with holders
oil recovery at total covered oil layer approx. up to 4 l/h
with oil collecting chute
oil outlet vertical downwards 25 mm outside Ø
temperature up to 80 °C
pH-value bis 4–11
submersible depth ET 300 mm (perhaps up to 600 mm possible)
input supply voltage 230 V, 50 Hz, operating voltage 24 V, speed adjustable over setting voltage
included transformer, cable about 3.5 m long and plug
with separate timer switch
casing of aluminium, driving roll of steel
mounting over magnet and 2 adjustments and best with about 30°

special design
free of non-ferrous heavy metal total made of steel or stainless steel and adjustments of stainless steel

Oil skimmer special for coolant emulsions designed, however for other applications to use too.

special design on request perhaps

Video for type OTF-SLV...(4) and similar for type OTF-SL...(4) useable

Oil skimmer special for coolant emulsions designed, however for other applications to use too.

special design on request perhaps

Oil skimmer special for coolant emulsions designed, however for other applications to use too.

vertical design and up to 65° pivoting
half open design
hose Ø 5 mm
with 2 hoses
with tension roll safety type D
oil recovery at total covered oil layer approx. up to 2 l/h
with oil collecting tank
oil outlet vertical downwards 20 mm outside Ø
temperature up to 50 °C
pH-value 6–8
submersible depth ET up to 2500 mm
input and operating supply voltage 230 V (one phase), 50 Hz, with cable plug
with separate timer switch with daily and weekly program on request
with on/off-switch and operating light
with float switch for the customer oil collecting tank
mounting over mounting plate (mounting magnet on request), holding rod adjustable in the high and pivoted up to 65°, holding arm side adjustable

Oil skimmer special for coolant emulsions designed, however for other applications to use too.

vertical design, closed design
hose and chain Ø 5 mm
with 5 hoses or with 2 chains
oil recovery at total covered oil layer approx. up to 2 l/h
with oil collecting tank
oil outlet vertical downwards 20 mm outside Ø
temperature up to 50 °C
pH-value bis 3–11
submersible depth ET up to 1500 mm
input supply voltage 230 V (one phase), 50 Hz, operating voltage 230 V or 24 voltage, motor protection in IP 65 on request
with trafo at operating voltage 24 V, cable and plug
with separate timer switch (at motor in IP 65 separate timer switch on request)
with on/off-switch and setting transporting time 0 – 40 min-1
mounting over mounting magnet, holding rod adjustable in the high, holding arm side adjustable

Oil skimmer special for coolant emulsions designed, however for other applications to use too.

vertical design
hose Ø 12 mm
hose length maximum 8 m with holders
oil recovery at total covered oil layer approx. up to 2 l/h
with oil collecting tank
oil outlet vertical downwards 20 mm outside Ø
temperature up to 50 °C
pH-value bis 4–9
submersible depth ET up to 2 m
input supply voltage 230 V (one phase), 50 Hz, operating voltage 12 V, speed over setting voltage adjustable
with trafo, cable and plug
with separate timer switch
mounting over mounting magnet and 2 adjustments and best fitting position